News & Advice

Home » News & Advice » Page 2

Installation of Ecosy Hampton Woodburner in Porlock

Installation of Ecosy Hampton Woodburning Stove in Porlock We removed an old open fire and constucted recess as large as was possible, although limited due to neighbours recess on reverse of wall. We found the width of the wall to only be 100mm so have to increase the width to 200mm as specified [...]

Installation of Ecosy Hampton Woodburner in Porlock 2019-03-08T17:39:20+01:00

Woodburner Installation in Westonzoyland

Our woodburner installer had to replace the customers old villager stove as it required a 6" flexible liner to certify, which wouldn't fit down the customers clay lined chimney. Therefore, the customer purchased a new Defra Ecosy Curve Stove which only required a 5" liner and this successfully squeezed down their chimney. The stove [...]

Woodburner Installation in Westonzoyland 2019-02-25T18:09:01+01:00

Ecosy Purefire Curve Defra Installation in Stogursey

Installation of Ottawa Curve Woodburner installer in Stogursey We supplied and installed this Ottawa Curve Defra woodburning stove in Stogursey after rendering fireplace and plastering the chimney breast. This installation also required a slate hearth and new chimney pot. The Ottawa Curve Defra stove can be used in smoke controlled areas and also allows [...]

Ecosy Purefire Curve Defra Installation in Stogursey 2019-02-08T11:46:10+01:00

Installation of Ecosy Purefire Woodburner in Taunton

We were asked to install a new Defra 10kw Ecosy Purefire woodburner to replace a large old broken woodburner. As the woodburner is rated over 5kw it requires an air vent through the wall. We also took up the hearth stoves, levelled for stove and installed a new chimney pot. We can supply Defra [...]

Installation of Ecosy Purefire Woodburner in Taunton 2019-01-11T18:53:11+01:00

No Chimney, No Problem! – Woodburner Installation with External Chimney System

No Chimney, No Problem! This project invovled installing a Charnwood Arc 5 Multi-Fuel woodburner in a two story property with no chimney in Minehead . Knocking a hole through the 70cm wide stone wall for the chimney was a lot of work, but the project was completed within 2 days as stated. We sourced [...]

No Chimney, No Problem! – Woodburner Installation with External Chimney System 2018-12-17T12:36:23+01:00

Fireplace Removal, Rebuild & Woodburner Installation in Minehead

This project invovled removing an old Arts and Craft Wood and Tile Surround, before excavating recess and prepare for a slate hearth and installation of Franco Belge ceramic coated woodburner. We dont often install green stoves, but this looks great in the original sized fireplace. The 25mm slate hearth is the perfect base for [...]

Fireplace Removal, Rebuild & Woodburner Installation in Minehead 2018-11-07T17:34:08+01:00